Epoxy & Polished Concrete

We install commercial epoxy coatings and polished concrete across Houston, on a slab we've tested and prepared ourselves. A coating is only as good as the concrete under it, so moisture testing and surface prep come before any system goes down.
Epoxy or polished concrete: which fits your floor
| Epoxy coating | Polished concrete | |
|---|---|---|
| What it is | A resin system built in coats over a profiled slab: primer, body coat, topcoat | The slab itself, ground, densified and polished |
| Best for | Labs, healthcare, commercial kitchens, manufacturing, wet areas | Warehouses, showrooms, retail, corridors |
| Chemical resistance | High, set by the topcoat | Moderate. Stains need a guard |
| Slip resistance | Added with broadcast aggregate | Set by the polish level |
| Moisture sensitivity | High. A wet slab can blister and lift the coating | Low for the finish itself |
| Upkeep | Recoat the topcoat as it wears | Clean and re-burnish |
Choose epoxy when you need chemical resistance, a sealed surface that cleans easily, or color. Choose polished concrete when the slab is sound and you want the lowest upkeep over a big area. If the slab reads high for moisture, polished concrete is often the safer pick.
How we build it
- Test the slab. ASTM F2170 in-situ RH probes before the bid is final. Coating manufacturers publish a moisture limit, and installing above it voids their warranty and ours.
- Profile the surface. Shot blasting or diamond grinding to the profile the manufacturer specifies. Epoxy holds by mechanical bond, so a smooth or contaminated slab fails first.
- Repair. Cracks and spalls filled, and joints honored or filled per the spec.
- Mitigate if needed. When the slab reads high, a moisture mitigation system goes down first. You get that cost before the job starts, not after a failure.
- Build the system. Primer, body coat and topcoat, or grind, densify and polish, to the manufacturer's spec.
- Document it. Moisture readings, products and batch numbers go in the closeout package.
What we install
- Epoxy, urethane and protective coatings
- Decorative and industrial epoxy systems
- Polished concrete from matte to high gloss
- Slip-resistant additives where the space needs them
- Coordination with concrete placement and curing schedules on new builds
Why epoxy floors fail
Most coating failures trace back to moisture vapor coming up through the slab, a surface that wasn't profiled deep enough, or coating over old sealers and contamination. We check all of it before we price the job. In Houston, a slab that looks dry can read well above a coating's limit, because our slabs sit on wet clay and humid air for years.
Warranty
Epoxy and coating systems carry a 2-year workmanship warranty. A coating is a multi-step build and can fail in ways a moisture test doesn't predict, so we don't stretch the term past what we control. Product warranties stay with the manufacturer.
Next steps: get a range from our commercial estimator, or book a moisture test and know what your slab can hold.
Pricing a floor for your home?
See installed prices per square foot by material, with the slab test and tear-out included.

